2 MEMBRANE  GASHOLDER

Two membrane constant-pressure gasholders are designed to store biogas made from anaerobic digestion of organic waste and sludge.

3 MEMBRANE GASHOLDER

Three membrane constant-pressure gasholders are designed to store biogas made from the anaerobic digestion of organic waste and sludge.

ODOR-CONTROL COVERS

The M1 CONE are suited to cover pre-tanks and post digestion tanks. They can be designed to cover the slurry tank for odor containment and rainfall protection or even to be gas tight and to serve as gas single membrane.

CUPOLA M1 SPRING

CUPOLA M1 SPRING are used primarily in agricultural facilities, in particular are suitable as digester cover on multiple interconnected tanks for replacement of the existing single rubber covers on top of wooden digester roofs.

BIOGAS FLOATING COVERS

The patented FLC GAS covers are designed to recover and maintain under low-pressure the biogas produced by anaerobic fermentation of sewage from all sources.

ECONTAINER

ECONTAINER are designed to store biogas made from anaerobic digestion of organic waste and sludge. They are also designed to work even to store different gases like Syngas from Pyrolysis and Hydrogen.

SPECIAL SHAPES

In particular cases we can realize gasholders with special shapes and working in pressure range from about zero to 70 mbar and more.

FOAM TRAP DEVICE

Ecomembrane’s FOAM TRAP DEVICE (FTD) is designed to detect and signal the presence of foam inside the digester before it causes clogging of downstream pipelines and safety valves.

SPECIAL SHAPES

In particular cases we can realize gasholders with special shapes and working in pressure range from about zero to 70 mbar and more.

LAGOON COVERS

The covers are tailor-made on existing or new lagoons to minimize gaseous pollutant emissions and to avoid evaporation and diffusion into the atmosphere caused by the wind.

ODOR-CONTROL COVERS

FLC MEMBRANE covers are custom designed to minimize odors and gaseous pollutants, and avoid evaporation and diffusion into the atmosphere caused by wind action. The covers are made with flexible sheets of closed cell poly-ethylene foam that is resistant to acids and weathering.

ODOR-CONTROL COVERS

The M1 CONE are suited to cover pre-tanks and post digestion tanks. They can be designed to cover the slurry tank for odor containment and rainfall protection or even to be gas tight and to serve as gas single membrane.

CLARICOVER®

CLARICOVER® is a new and unique solution to cover the primary and secondary clarifier tanks of the waste water treatment plants. It serves to cover the clarifier open tanks in order to capture and then threat the bad smelling gaseous emissions.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.